XF605 Firmware Update version 1.0.3.1

Thank you for using Canon products.

Changes:
Firmware Version 1.0.3.1 incorporates the following enhancements:

1. Adds support for the Canon Multi-Camera Control.

2. Adds support for the Remote Camera Controller RC-IP1000.

3. Adds SRT protocol for IP streaming protocol.

4. Enables to select 1920×1080 59.94i/50i 25Mbps format when in XF-AVC recording.

5. Adds [Chunk Recording] function. Simultaneously records a clip that split by time, suitable for automatic transfer to SD card B while the main clip is recorded to SD card A.

6. Adds the function to automatically transfer chunk recording clip via Content Transfer Mobile.

7. Enhances Clear Scan resolution.

8. Enables to change WFM size.

9. Enables to change Vector scope gain by touch.

10. Enables to change WFM/Vector scope transparency.

11. Improves Vector scope.
- Changes to display [BT.2020] in the frame when the colour space is set to BT.2020.
- Changes to always display the target colour name.

12. Adds [Canon 709 / BT.709] to the Gamma/Colour Space in Custom Picture setting.

13. Adds [CMT 709] in LUT and View Assistance, Sub Rec Colour Conversion.

14. Adds [G Gain] in White Balance in Custom Picture settings.

15. Adds [_Proxy] option to XF-AVC proxy media name.

16. Enables select multiple files from a playlist for indexing and continuous playback. 17. Adds [LCD/VF] in Peaking and Zebra settings.
- The default setting of the [All] has been changed from [LCD/VF] to prevent unintended effects from being applied to HDMI/SDI output.

Caution:
- Please use a commercially available SD/SDHC/SDXC memory card that is 512MB or greater to perform the firmware update.
- Firmware version 1.0.3.1 is for updating cameras running firmware version 1.0.0.1 - 1.0.2.1. If your camera's firmware is already version 1.0.3.1, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
- Please refrain from loading menu settings generated using the most recent firmware version to a product running an old firmware version, as doing so may affect camera operations.

Preparations for a firmware update:
After the firmware update has been performed, the camera's menu settings will be reset. It is recommended that, prior to starting update operations, users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update. This saved data can be loaded into the camera and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Camera Settings."

The downloaded folder contains the firmware (file name: VRA10.FIR / file size: 72,934,736 byte), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Prior to starting the firmware update operations, please be sure to carefully review and confirm your understanding of these instructions.

The following items are required to perform this firmware update:
1. An XF605 camcorder
2. A computer (OS requirements: OS：Windows 11, Windows 10、Windows 8.1、 Mac OS 12、11、10.15、10.14)
3. SD/SDHC/SDXC memory card with a capacity of 512MB or more (commercially available)
4. An SD card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware