Issue
Cause and solution
Check 1: If all the lamps on the Operation Panel are off, make sure that the power plug is plugged in, then turn the machine on
While any lamp on the Operation Panel is flashing, the machine is initializing. Wait until the lamp on the Operation Panel stops flashing and remains lit.
Cause and solution
Check 2: Make sure that the printer port is configured appropriately in the MP Drivers
* In the following instructions, "XXX" signifies your machine's name.
1. Log on as a user account with administrator privilege.
2. Select items from the Start menu as shown below.
3. Open the properties of printer driver for the machine.
4. Click the Ports tab to confirm the port settings.
Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX Printer" appearing in the Printer column is selected for Print to the following port(s).
Caution
* "xxxxxxxxxx" is the character string generated from the MAC address or a character string specified by the user when setting up the machine
Cause and solution
Reinstall the MP Drivers.
Launch Canon My Printer from the task tray, select Diagnose and Repair Printer. Follow the on-screen instructions to set the correct printer port, then select your machine's name.
If the problem is not resolved, reinstall the MP Drivers.
Launch IJ Network Tool, and select "CNBJNP_xxxxxxxxxx" as you confirmed in step 4, then associate the port with the printer using Associate Port in the Settings menu.
If the problem is not resolved, reinstall the MP Drivers.
Cause and solution
Check 3: Make sure that the machine is connected to your computer properly
When the machine is connected to your computer with a USB cable, make sure that the USB cable is securely plugged in to the machine and the computer, then check the followings:
When you use the machine over LAN, make sure that the machine is set up to be used over network correctly. For details, refer to your setup manual.
Cause and solution
Check 4: Make sure that the MP Drivers are installed correctly
Uninstall the MP Drivers following the procedure described in [ Deleting the Unnecessary MP Drivers ], insert the Setup CD-ROM into the computer's disc drive and perform Custom Install and select MP Drivers to install again.
Cause and solution
Check 5: When the machine is connected to your computer with a USB cable, check the status of the device on your computer
Follow the procedure below to check the status of the device.
1. Open the Device Manager on your computer as shown below.
If the User Account Control screen is displayed, follow the on-screen instructions.
2. Double-click Universal Serial Bus controllers then USB Printing Support.
If the USB Printing Support Properties screen is not displayed, make sure that the machine is correctly connected to the computer.
-⋗ [ Check 3: Make sure that the machine is connected to your computer properly ].
3. Click the General tab and make sure that there is no indication of a problem with the device.
If a device error is displayed, refer to Windows help to resolve the error.