Solution
Preparing for Receiving a FaxReceiving a Fax
Receiving a Fax Temporarily in the Machine's Memory (Memory Receiving)
Printing Documents in the Machine's Memory
This section describes the preparation necessary for receiving a fax and how to receive a fax. This section also describes the operation to print documents stored in the machine's memory such as when ink or paper runs out.
(A) Prints a received fax.
See [ Receiving a Fax ].
(B) Stores a received fax in the machine's memory without printing it.
See [ Receiving a Fax Temporarily in the Machine's Memory (Memory Receiving) ].
(C) Automatically saves a received fax on the USB flash drive.
Preparing for Receiving a Fax
Prepare for receiving a fax according to the following procedure.
1. Make sure that the power is turned on.
2. Make sure of the receive mode setting.
(1) Press the FAX button.
(2) Confirm the receive mode.
3. Load paper.
See [ Loading Paper ]
Here we make sure that the plain paper is loaded in the Rear Tray.
4. Specify the paper settings as necessary.
(1) Press the Settings button.
The Page size screen will appear.
(2) Use the (-) or
(+) button to specify Page size, and press the OK button.
You can specify A4, Letter, or Legal.
(3) Confirm that Plain paper is selected for Media type, and press the OK button.
Caution
Caution
See [ Receiving a Fax Temporarily in the Machine's Memory (Memory Receiving) ].
Receiving a Fax
Depending on the selected receive mode, the receive operation varies.
When the call is a fax:
The telephone will ring when a call incomes.
(1) Pick up the handset. If you hear the fax tone, wait for at least 5 seconds after it stops, then hang up the handset.
The machine will receive the fax.
Caution
Other options
Caution
When the answering machine is connected to the machine
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
When the call is a voice call:
The telephone will ring when a call incomes.
(1) Pick up the handset, and talk on the telephone.
Caution
When the call is a fax.
The machine will receive the fax automatically.
Caution
Other options
When the call is a fax:
The telephone will ring when a call incomes.
The machine will receive the fax automatically when the fax ring pattern is detected.
Caution
Other options
When the call is a voice call:
The telephone will ring when a call incomes.
When the machine does not detect the fax ring pattern, the telephone will continue ringing.
(1) Pick up the handset, and talk on the telephone.
Caution
For DRPD
For Network switch
Receiving a Fax Temporarily in the Machine's Memory (Memory Receiving)
If the machine was not able to print a received fax, the machine stores the unprinted fax temporarily in its memory (memory receiving).
When a fax is stored in the memory, the FAX Memory lamp lights and the message "Received in memory" appears on the LCD.
Caution
If the machine receives a fax under one of the following conditions, the machine will automatically store the received fax in its memory.
To store received documents in the machine's memory, select Do not print for Received documents in Auto print settings.
You can print the documents stored in the machine's memory from the Memory reference screen.
See [ Printing Documents in the Machine's Memory ].
If you select Print for Received documents in Auto print settings, a received fax will be printed automatically. However, if any of the following errors occurs, the received fax will not be printed. It will instead be stored in the machine's memory.
- The amount of remaining ink is insufficient to print a fax.
The fax in the machine's memory will be automatically printed when a new FINE Cartridge is installed.
Caution
Print when out of ink
Load the paper and press the OK button. The fax in memory will be automatically printed.
Load paper of the same size as selected for Page size, and press the OK button. The fax in memory will be automatically printed.
Select A4, Letter, or Legal for Page size.
See [ Preparing for Receiving a Fax ].
Select Plain paper for Media type.
See [ Preparing for Receiving a Fax ].
Press the FAX button to resume printing of the fax.
Caution
* When using ITU-T No.1 chart (Standard mode)
See [ Printing Documents in the Machine's Memory ].
Printing Documents in the Machine's Memory
You can print all documents received in the machine's memory at once or select a document for printing on the Memory reference screen. You can also save the documents on the USB flash drive.
This section describes the procedure to print all the received documents in the memory.
Caution
1. Load paper.
See [ Loading Paper ].
Here we make sure that plain paper is loaded in the Rear Tray.
2. Specify the paper settings as necessary.
If a page size other than A4, Letter, or Legal, or a media type other than Plain paper is selected, faxes or reports cannot be printed. Confirm or change the paper settings.
See [ Preparing for Receiving a Fax ].
3. Display the Memory reference screen.
(1) Press the FAX button, and press the Menu button.
(2) Use the (-) or
(+) button to select Memory reference in the Fax settings menu, and press the OK button.
4. Print all the received documents in the memory.
(1) Use the (-) or
(+) button to select Print all RX docs, and press the OK button.
Caution
(2) Use the (-) or
(+) button to select Yes, and press the OK button.
The machine starts printing documents in the memory one by one.
(3) To delete the printed document, use the (-) or
(+) button to select Yes.
To keep the document in the memory, select No.
(4) Press the OK button.
Caution