You can assign often-used functions to camera buttons or dials according to your preferences.
Customizing Controls
1. Set the camera's power switch to ⋖ ON ⋗.
2. Set the lens's focus mode switch to ⋖ AF ⋗.
3. Press the ⋖MENU⋗ button to display the menu.
4. Under the [ ] tab, select [Custom Controls], then press ⋖
⋗.
5. Turn the ⋖ ⋗ dial to select a camera control, then press ⋖
⋗.
6. Turn the ⋖ ⋗ dial to select a function, then press ⋖
⋗.
7. When the setting change is complete, the screen for step 5 will reappear.
The camera control will be changed to the item set in step 6.
●Press the ⋖ MENU ⋗ button to exit.
Caution
With the screen in step 5 displayed, you can press the [ ] button to revert the Custom Control settings to their defaults. Note that the [
: Custom Controls ] settings will not be canceled even if you select [
: Clear all Custom Func. (C.Fn) ].
Assignable Functions to Camera Controls
Function | |||||||||||||
AF | Metering and AF start | ||||||||||||
AF stop | |||||||||||||
Switch to registered AF function | |||||||||||||
ONE SHOT | |||||||||||||
Switch to registered AF point | |||||||||||||
AF point direct selection | |||||||||||||
Select AF point | |||||||||||||
Pause Movie Servo AF | |||||||||||||
Exposure | Metering start | ||||||||||||
AE lock | |||||||||||||
AE lock (while button pressed) | |||||||||||||
AE lock (hold) | |||||||||||||
AE lock, AF stop | |||||||||||||
FE lock | |||||||||||||
ISO speed | |||||||||||||
Set ISO Speed (hold button, turn | |||||||||||||
ISO speed ( | |||||||||||||
Set ISO, | |||||||||||||
Exposure compensation (hold button, turn | |||||||||||||
Shutter speed setting in M mode | |||||||||||||
Aperture setting in M mode |
Function | |||||||||||||
Images | Image size selection | ||||||||||||
One-touch image quality setting | |||||||||||||
One-touch image quality (hold) | |||||||||||||
Record function+card/folder selection | |||||||||||||
Picture Style | |||||||||||||
White balance selection | |||||||||||||
Operation | Depth-of-field preview | ||||||||||||
IS start | |||||||||||||
Menu display | |||||||||||||
Register/recall shooting function | |||||||||||||
Unlock while button pressed | |||||||||||||
Start movie recording (when | |||||||||||||
Switch to Custom shooting mode | |||||||||||||
Image replay | |||||||||||||
Magnify/Reduce (press SET, turn | |||||||||||||
Magnify/Reduce button | |||||||||||||
Playback button | |||||||||||||
Info button | |||||||||||||
Erase button | |||||||||||||
Protect button | |||||||||||||
Cycle between the set functions | |||||||||||||
Flash function settings | |||||||||||||
No function (disabled) |
*1: When assigned to the < AF-ON > or < > button, pressing the < INFO. > button while the setting screen is displayed will enable you to set the detailed AF settings. When shooting, pressing the < AF-ON > or <
> button will perform AF as it was set.
*2: With the setting screen displayed, press the < INFO. > button to display the detailed settings screen. Turn the < > or <
> dial to select the parameter to be registered, then press <
> to add a checkmark [
]. When you select a parameter, then press <
>, you can adjust the parameter setting. By pressing the <
> button, you can revert the settings to their defaults.
*3: With the setting screen displayed, when you press the < INFO. > button, you can select [Switch only when btn is held] or [Switch each time btn is pressed].
*4: With the Quick Control Dial setting screen displayed, you can press the < INFO. > button, then set the direction for switching the AF point for when the < > dial is turned. The [Direction: AF point switching] settings for [Horizontal] and [Vertical] will work for Single-point Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area: Surround. The [Direction: Zone AF frame switch] settings for [Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.
*5: On the Multi-controller setting screen, press the < INFO. > button and you can select the AF point ([ Switch to center AF point ] or [ Switch to registered AF point ]) the camera switches to when you press the center of < >.
*6: With the setting screen displayed, you can press the < INFO. > button, then set the direction for switching the AF point for when the < > dial is turned. The [Direction: AF point switching] settings for [Horizontal] and [Vertical] will work for Single-point Spot AF, Single-point AF, Man. select.: AF point expansion, and Expand AF area: Surround. The [Direction: Zone AF frame switch] settings for [Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.
*7: With the setting screen displayed, by pressing the < INFO. > button, you can set the image size for this function.
*8: With the setting screen displayed, press the < INFO. > button to display the detailed settings screen. Turn the < > or <
> dial to select the function to be registered, then press <
> to add a checkmark [
]. When you select a function, then press <
>, you can adjust the setting. By pressing the <
> button, you can revert the settings to their defaults. By selecting [Register current settings], the camera's current settings will be registered.
*9: With the setting screen displayed, press the < INFO. > button to display the detailed settings screen. You can select the functions to switch. Turn the < > dial to select the desired function, then press <
> to add a checkmark [
]. Then select [OK] to register the setting.
Caution
stands for the [ AF stop button ] provided on super telephoto lenses equipped with Image Stabilizer.