Solution
Dust that could not be removed by the automatic sensor cleaning can be removed manually with a commercially-available blower, etc.
Caution
The image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.
Caution
For the power source, using DC Coupler DR-E18 and AC Adapter AC-E6N (each sold separately) is recommended. If you use a battery, make sure it is fully charged.
1. Before cleaning the sensor, detach the lens from the camera.
2. Set the power switch to ⋖ON⋗.
3. Press the ⋖MENU⋗ button to display the main tabs.
4. Press the ⋖ ⋗ ⋖
⋗ keys of the cross keys to select the [
] tab, then press ⋖
⋗.
5. Under the [ ] tab, select [Sensor cleaning] with the cross keys, then press ⋖
⋗.
6. Select [Clean manually], then press ⋖ ⋗.
7. Select [OK], then press ⋖ ⋗.
8. In a moment, the reflex mirror will lock up and the shutter will open.
9. Using a commercially available blower, blow dust that is stuck to the surface while preventing the blower from directly touching the sensor.
10. After cleaning, set the power switch to ⋖OFF⋗.
Caution
- Setting the power switch to ⋖OFF⋗.
- Removing or inserting the battery.