LEGRIA HF G25 Support

FAQ and troubleshooting

Changing the Audio Recording Level (mic. level) when Recording Audio (VIXIA HF G20 / LEGRIA HF G25)

Content Id: 8201772300

Solution

You can adjust the audio recording level of the built-in or an external microphone. You can display the audio level indicator while recording.

1. Set the mode switch to ⋖M⋗ or ⋖CINEMA⋗.

2. Turn on the camcorder.

3. Touch [ ].

4. Drag your finger up and down to display the rest of the panel, and then touch [Audio Scene].

5.Touch [ Custom Setting ].

6. Touch [ ] to close the menu.

7. Touch [ ].

8. Drag your finger up and down to display the rest of the panel, and then touch [Mic. Level].

9.Touch [M Manual].

10. Touch and hold or to adjust the audio recording level as necessary.

As a guideline, adjust the audio recording level so that the audio level meter will go to the right of the -12 dB mark (yellow area) only occasionally.

Caution

Touch [ A Automatic] to return the camcorder to automatic audio recording levels.

When [Audio Mix] is set to [On], two audio level indicators will appear; the top one ([INT]) for the built-in microphone, and the bottom one ([EXT]) for the external audio.

11.Touch [ ] to lock the audio recording level at the current level.

Caution

Usually, the audio level indicator will be displayed only after activating the manual adjustment of the audio recording level. You can choose to display it also when the audio level is adjusted automatically.

1.Touch [A Automatic]

2.Touch [Audio Level Indicator]

3.Touch [ ].

Caution

When the audio level meter reaches the red point (0 dB), the sound may be distorted.

We recommend using headphones to check the sound level while adjusting the audio recording level or when the microphone attenuator is activated.

If you set [Custom Key/Dial] to [Mic. Level], you can adjust the microphone's audio recording level with the CUSTOM dial.

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit