Connecting an external microphone

Content Id: 8202730300

The procedure for connecting an external microphone is explained below.

For more information on settings, refer to the Related information.

To use the INPUT 1/INPUT 2 terminals,, infrared light, and tally lamp, attach the HDU-1 handle unit to the camcorder.

1. Use the supplied screws to attach the microphone holder unit to the handle unit ().

2. () Align the handle unit with the handle attachment unit and then () slide the handle unit forward until it is in place.

Make sure the front and rear screws are raised when you slide the handle unit.

XA30: Make sure to turn the screws and remove the cover before using.

3. Firmly tighten the front and rear screws with a coin or similar object.

1. Loosen the microphone lock screw (), open the microphone holder and insert the microphone ().

*1:Microphone lock screw

2. Tighten the lock screw () and put the microphone cable through the microphone cable clamp under the microphone holder ().

*2:Terminals INPUT 1/INPUT 2

*3:Cable clamp

3. Plug the microphone cable into the desired INPUT terminal or the MIC terminal ().

*4:MIC terminal

"Was this helpful?"

Yes.It solved my issue

It covered my problem, but the solution didn't work for me

The information on the page is hard to understand

It has nothing to do with my issue

Submit