Autofocus may not work well on the following subjects. In such case, focus manually.
Adjust the zoom before you start the procedure.
Manual Focus Adjustment
You can adjust the focus manually and use the peaking function to assist you or you can let the camcorder focus for you by using autofocus.
1. Set the mode switch to ⋖M⋗ or ⋖CINEMA⋗.
2. Turn on the camcorder.
3. Touch [ ].
4. Touch [ Focus ].
5. Touch [ ].
6. Touch a subject that appears inside the frame.
The Touch AF mark [ ] will flash and the focusing distance will be adjusted automatically. You have the option to further adjust the focus manually as necessary.
7. Turn the focus ring to adjust the focus.
The focusing distance displayed will change as you adjust the focus. You can change the units used for the distance display with the [ ] -⋗ [Distance Units] setting.
For your reference, the focal distance to an in-focus subject in the scene appears during operation for a few seconds.
To return to autofocusing, carry out steps 3 and 4 again, and then touch the [ ] button.
Caution
Focus Preset
When focusing manually, you can set a preset position for the focus in advance so that you can later return to that preset focus position instantly.
1. Adjust the focus following step 7 in the "Manual Focus Adjustment" procedure, and then touch [ ].
The current focus position will be set as a preset focus position.
2. After adjusting the focus, touch [ ]* to return to the preset focus position.
*[ ] will be grayed out while adjusting the focus or zoom.
Caution
Using the Peaking Function
When peaking is activated, edges in focus on the screen will be highlighted in red, blue or yellow. In addition, you can choose to switch the screen to black & white, further emphasizing the edges.
When carrying out step 5 for focusing manually, touch the [ ] button to turn it to [ ] so that a colored outline appears on an in-focus subject in the scene.
Touch the [ ] button again to turn it to [ ].
If you touch [ ], the following screen appears.
- For the black & white setting: Touch [Off] or [On]
- For the peaking color: Touch [Red], [Blue] or [Yellow]
Caution
Using the peaking function will not affect your recordings.