Solution
Recording Method with Two Cards Inserted (Set to [Rec. separately])Setting the image-recording quality for each card
If both a CF () card and SD (
) card are inserted into the camera, you can set the recording method for the cards.
This section explains how to record a captured image to both the CF and SD cards simultaneously with a different size selected for each.
Recording Method with Two Cards Inserted (Set to [Rec. separately])
1. Set the power switch to [ON].
2. Press the [MENU] button ( ) to display the menu screen. Next, press the [
] button (
) to select [
] tab (
).
3. Turn the [ ] dial to select [Record func+card/folder sel.], then press [
].
4. Select [Record func.] when the next screen is displayed, then press [ ].
5. Select the recording method from [Record func.].
Turn the [ ] dial to choose [Rec. separately], then press [
].
Caution
You can select the desired recording method from the four options listed below:
6. When you return to the [Record func+card/folder sel.] screen after completing the procedure, [Rec. separately] will be displayed for the recording method.
This concludes the steps for setting the recording method to [Rec. Separately].
Caution
Caution
[Rec. separately] and [Rec. to multiple]
Selecting the CF or SD Card for Playback
7. Return to the [Record func+card/folder sel.] screen, then turn the [ ] dail to select [Playback] and press [
].
*When [Rec. separately] / [Rec. to multiple] is set.
Caution
8. Select [ : CF Card ] or [
: SD card ] and press [
].
When you press the camera's [ ] button, images will be played back from the selected card.
Setting the image-recording quality for each card
Next, select the size (recorded pixels) and the type (JPEG or RAW) of the image you want to record to the card.
2. Press the [MENU] button ( ) to display the menu screen. Next, press the [
] button (
) to select [
] tab (
).
2. Turn the [ ] dial to select [Record func.] and press [
].
3. Turn the [ ] dial to select the desired card, then press [
].
(The CF card has been selected in the example image.)
4. Turn the [ ] dial to select the image recording quality, then press [
].
5. Confrim that the [ ] setting has been changed.
6. Repeat steps 3 through 4, select the other card, and make the settings.
Caution
The image recording quality can also be set using the following procedure:
1. Press the [INFO.] button to display the [Quick Control] screen.
2. On the [Quick Control] screen, press the [ ] button to display the selection frame.
3. Operate [ ] to move the selection frame to the position indicated by
in the example image.
4. Turn the [ ] dial to select the desired setting, then press [
].