Solution
1. Holding the Camera2. When the Camera Shake Warning Icon Appears
3. When Shots Are Out of Focus
4. When No AF Frames are Displayed and the Camera Does Not Focus
5. Shooting Conditions When the Camera May Have Difficulty Focusing
When an image is blurry or cannot be brought into focus during shooting, try to switch to [ ] mode. If focus still can not be achieved, please confirm the following.
Caution
1. Holding the Camera
Hold the camera securely to reduce camera shake.
2. When the Camera Shake Warning Icon Appears
In low-light conditions, the [Camera shake warning icon] ( ) blinks when you press the shutter button halfway. Refer to the following points to prevent camera shake.
Turn the camera on.
Press the [MENU] button and then choose the [
] tab.
Press the [ ], [
] buttons, choose [IS Settings], and then press the [
], [
] buttons to set [IS Mode] to [Continuous].
Lift the flash, press the [ ] button, and then press the [
], [
] buttons to choose [
](On).
Press the [ ] button, then select [
] from the menu and choose the desired [ISO Speed].
Caution
To set the [ISO Speed], it is necessary to set the [Shooting Mode] to one of the following modes:
- [Program AE] (P), [Long Shutter] ( )*
*[ ] cannot be set in [Long Shutter] mode.
You should set [IS Mode] to [Off] when using a tripod or other means to secure the camera.
3. When Shots Are Out of Focus
Caution
If [Digital Zoom] is enabled, deactivate it by pressing the [MENU] button, choosing [ ] tab, and then choosing [Off].
Press the shutter button halfway (press lightly to focus) before pressing all the way down (press fully to shoot).
Shooting Range
Focus Range | Maximum Wide Angle | Maximum Telephoto |
5 cm (2.0 in.) - infinity | 1.3 m (4.3 ft.) - infinity | |
0 - 50 cm (0.0 in. - 1.6 ft.) | - | |
3.0 m (9.8 ft.) - infinity | 3.0 m (9.8 ft.) - infinity |
* Cannot be selected for some shooting modes.
Turn the camera on.
Press the [MENU] button and then choose the [
] tab.
Press the [
] , [
] buttons to choose [AF-assist Beam], and then choose [On].
Turn the camera on.
Press the [
] button, and then choose a [Focus Range] suitable for your environment.
[Focus Lock]
Aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down.
4. When No AF Frames are Displayed and the Camera Does Not Focus
To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered and then press the shutter button halfway, or press the shutter button halfway repeatedly.
Caution
For some shooting scenes and subjects, the camera might not focus correctly.
5. Shooting Conditions When the Camera May Have Difficulty Focusing
Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
Note, that the camera may misinterpret non-human subjects as faces.
Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
- Focusing may not be possible in some shooting conditions.
- In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway. In this case, the focus and exposure are set according to the specified AF frame mode.
If the problem cannot be solved even after you checked all solutions above, the camera may be malfunctioning, so please contact Canon Customer support Help Desk.