Close
Solution
Cleaning the Inside of the Machine (Bottom Plate Cleaning)Cleaning the Protrusions inside the Machine
Perform the Bottom Plate Cleaning to clean the inside of the machine.
Caution
When performing borderless printing, duplex printing, or too much printing, the inside may become stained with ink.
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.
Caution
1. Make sure that the machine is turned on.
2. Open the Paper Output Tray gently.
3. Remove any paper from the Rear Tray.
4. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper.
5. Load this and only this sheet of paper on the Rear Tray with the open side facing to the front.
(A) Load the paper after unfolding it.
6. Press the Menu button repeatedly until Maintenance appears.
7. Use the 
The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning again.
If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Clean them according to instructions.
-⋗ [ Cleaning the Protrusions inside the Machine ]
Caution
Cleaning the Protrusions inside the Machine
If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like.
Caution
